Flower Mound (214) 222-5234·Plano·Garland info@assuredinsgroup.com

Texas · Commercial insurance

Contractor Insurance in Texas: What General Contractors and Trades Are Asked to Carry

The insurance the state requires for licensed trades, the coverage that contracts and general contractors ask for on top, and how to check that your policy matches before you bid.

Builder holding a hammer looking up at new timber roof framing
Builder holding a hammer looking up at new timber roof framing. Photo: Pexels

In short

Texas sets liability insurance minimums for certain licensed trades: $300,000 per occurrence and $600,000 aggregate for electrical contractors and Class A air conditioning contractors, and at least $300,000 for a Responsible Master Plumber. Workers’ compensation is optional for most private employers but required on building or construction projects for government entities. Beyond that, the contract you sign usually sets the coverage and limits.

  • Electrical contractors must carry at least $300,000 per occurrence, $600,000 aggregate and $300,000 for products and completed operations.
  • Air conditioning and refrigeration contractors have two tiers: Class A matches the electrical minimums and Class B is $100,000 per occurrence and $200,000 aggregate.
  • A Responsible Master Plumber must show proof of at least $300,000 of commercial liability insurance.
  • Workers’ compensation is required for every person working on a building or construction project for a governmental entity.
  • License minimums are a floor. Owners and general contractors often write higher limits and more coverages into the contract.

In this article

  1. Does Texas law require contractors to carry insurance?
  2. What do owners and general contractors ask for on top of that?
  3. Is workers’ compensation required for Texas contractors?
  4. What does a contractor’s general liability policy cover, and what does it miss?
  5. A worked example: when the license minimum is not enough
  6. What about tools, trailers, materials and trucks?
  7. Do you also need a bond?
  8. What should you check before you bid on a job?

Service: Commercial Insurance in Flower Mound, Plano and Garland

If you run a contracting business in Texas, two things decide what insurance you must carry: your license and your contracts. The state sets liability minimums for electrical, air conditioning and plumbing contractors. For everyone else, and for every job above those minimums, the owner or general contractor writes the requirement into the agreement you sign.

Does Texas law require contractors to carry insurance?

For certain licensed trades, yes. The licensing agencies ask for proof of liability coverage as part of the license. These are the minimums published by the Texas Department of Licensing and Regulation (TDLR) and the Texas State Board of Plumbing Examiners.

State liability insurance minimums for licensed trades

LicensePer occurrenceAggregateProducts and completed operations
Electrical contractor (TDLR)$300,000, combined for property damage and bodily injury$600,000$300,000 aggregate
Air conditioning and refrigeration contractor, Class A (TDLR)$300,000, combined for property damage and bodily injury$600,000$300,000 aggregate
Air conditioning and refrigeration contractor, Class B (TDLR)$100,000, combined for property damage and bodily injury$200,000$100,000 aggregate
Responsible Master Plumber (Plumbing Board)At least $300,000 of commercial liability coverageNot stated separatelyNot stated separately

What this means for you: if you hold one of these licenses, the minimum is not optional. Keep the policy in force without a gap, and when you change insurance companies, make sure the new policy meets the same minimums before the old one ends.

“Per occurrence” is the most the policy pays for one incident. “Aggregate” is the most it pays for all claims in the policy period. Both terms are explained in our insurance glossary.

Proof goes to the agency on its own form. TDLR uses an Electrical Contractor Certificate of Insurance form with the license application, and the Plumbing Board requires proof of coverage from a Master Plumber who applies for the Responsible Master Plumber designation. A plumbing company’s Responsible Master Plumber is the person who must keep that insurance in place, pull permits and request inspections.

Cities can add their own layer. Some ask a contractor to register and show insurance or a bond before they issue permits, and the rules differ from one city to the next. Check with the building department in each city where you work.

What do owners and general contractors ask for on top of that?

A license minimum is a floor set by the state. The contract is where the real number lives. Commercial owners, property managers, builders and general contractors write an insurance section into their agreements, and it usually asks for several coverages at limits higher than any license requires.

Coverages a construction contract commonly asks for

CoverageWhat it pays forTypical reason it is required
General liabilityInjury to other people and damage to their property from your work, including after the job is finishedThe core protection for the owner and the general contractor
Commercial autoLiability and damage from vehicles used in the businessTrucks and trailers on and off the site
Workers’ compensationMedical care and part of lost wages for employees hurt on the jobKeeps injured workers’ claims off the project
Umbrella or excess liabilityLimits above the general liability and auto policiesLarge projects want higher totals
Inland marine (tools and equipment)Your tools, equipment and materials on site and in transitProtects your ability to finish the job
Builder’s riskThe structure while it is under constructionUsually bought by the owner or the general contractor
Additional insured and waiver of subrogationExtends rights under your policy to the owner or general contractorStandard contract language

What this means for you: read the insurance section before you price the job. Meeting it can change your premium, and that cost belongs in your bid.

Each of these has its own article: general liability for a Texas small business, commercial auto insurance, commercial umbrella and excess liability, and additional insured and waiver of subrogation. The proof you hand over is a certificate of insurance, covered in what a COI is and how to get one.

Is workers’ compensation required for Texas contractors?

For most private work, no. The Texas Department of Insurance (TDI) states that Texas does not require most private employers to have workers’ compensation. Construction has one clear exception and several practical ones.

Government projects. TDI says private employers that contract with government entities must provide workers’ compensation for employees working on the project. The Division of Workers’ Compensation notice that must be posted on these sites goes further: each person working on the site or providing services related to the construction project must be covered, including people hauling or delivering equipment or materials, regardless of who their employer is.

On those jobs the contractor has to post that notice, known as Notice 8, at each project site in English, Spanish and any other language common to the workforce. Failing to post it is a violation that can bring administrative penalties.

Contract requirements. TDI notes that some contractors require their subcontractors and independent contractors to carry coverage. Expect to see it in the insurance section of larger jobs.

The cost of going without. An employer without coverage loses protection from most injury lawsuits. TDI explains that in such a suit the employer cannot argue that the employee’s own negligence, a co-worker’s negligence, or the employee’s knowing acceptance of the danger caused the injury. Employers without coverage must also file an annual notice with the Division of Workers’ Compensation, post notices at the workplace and tell new employees in writing that they are not covered.

The Division of Workers’ Compensation also publishes agreement forms for construction relationships, including an agreement between a general contractor and a subcontractor for providing coverage (DWC Form-081) and agreements to establish an independent relationship (DWC Form-083 and DWC Form-085). Which form fits your situation is a legal question, so ask an attorney before relying on one. Our article on workers’ compensation in Texas explains the choice in full.

What does a contractor’s general liability policy cover, and what does it miss?

General liability is the policy every contract starts with. It pays when your work injures someone who is not your employee or damages property that is not yours, and it pays for your legal defense. The NAIC describes completed operations coverage as the part that protects contractors, plumbers, electricians and similar firms from injury or damage caused by defective work after the job is done and you have left the site.

That last part is why the electrical and air conditioning license rules set a specific products and completed operations limit. A wiring fault can start a fire long after the final invoice.

What a standard general liability policy does not cover is just as important:

  • Your own tools and equipment. These need inland marine coverage. See tools and equipment insurance.
  • Your vehicles. These need a commercial auto policy.
  • Your employees’ injuries. Workers’ compensation is a separate policy.
  • Professional mistakes. Design, engineering or consulting errors need professional liability.
  • Pollution. Most pollution claims are excluded and need separate coverage.
  • The cost of redoing your own poor work. Many policies respond to the damage faulty work causes, not to the cost of doing the work again. Check your policy wording.

A worked example: when the license minimum is not enough

This is an illustration with round numbers, not a quote. An electrical contractor in Garland carries exactly the state minimum: $300,000 per occurrence and $600,000 aggregate. A general contractor offers a tenant finish-out job with a contract that requires $1,000,000 per occurrence and $2,000,000 aggregate.

The electrician’s certificate shows $300,000, so the general contractor either rejects it or the electrician has to raise the limits before starting. Suppose the limits stay where they are on a different job with no written requirement, and a connection the electrician made overheats and causes a fire with $450,000 in damage.

The policy pays up to $300,000 for that one occurrence. The other $150,000 is the contractor’s own problem. A higher limit, or an umbrella over the general liability policy, would have closed that gap. The license minimum keeps you legal. It does not tell you how much a serious claim costs.

What about tools, trailers, materials and trucks?

Contractors keep much of their value on wheels and on other people’s property. A property policy written for a shop or an office often does not follow your equipment to a job site.

  • Tools and equipment on a site, in a truck or in a trailer belong on an inland marine policy. Ask whether it pays replacement cost and whether theft from an unattended vehicle is limited.
  • Materials waiting to be installed may or may not be covered, depending on who bought the builder’s risk policy and what it says.
  • Trucks and trailers used for work belong on a commercial auto policy. A personal auto insurance policy may not cover daily business use.
  • Employees driving their own vehicles on your errands create a liability you can insure with hired and non-owned auto coverage.

North Texas hail matters here too. A yard full of work trucks is covered for hail only if the vehicles carry comprehensive coverage.

Do you also need a bond?

Sometimes. A bond is not insurance, and one does not replace the other. Insurance pays covered claims on your behalf. A surety bond guarantees to an owner or a government body that you will meet an obligation, and if the surety pays, it can come back to you for the money.

Cities, public projects and some private owners ask for bonds. Our article on surety bonds and insurance explains the types and when each is requested.

What should you check before you bid on a job?

Use this checklist before you send a number.

  1. Read the insurance section of the contract. Write down each coverage, each limit and each endorsement it asks for.
  2. Compare it with your declarations pages. Look for gaps in limits, missing policies and missing endorsements.
  3. Confirm your license minimums are met and that the agency has current proof.
  4. Check whether the owner is a government entity. If so, workers’ compensation is required for everyone on the project.
  5. Ask each subcontractor for a certificate and read it. Keep it on file.
  6. Ask what your policy says about uninsured subcontractors. Some policies have conditions that affect coverage or cost.
  7. Price the insurance into the bid. Higher limits and added endorsements can raise the premium.
  8. Request your certificate early. Do not wait for the morning the job starts.

Keep your payroll and subcontractor records in order through the year. General liability and workers’ compensation premiums for contractors are usually based on payroll or receipts, and the final figure is set after the policy ends. Our article on the business insurance premium audit explains why a bill can arrive later and how to avoid surprises. Our commercial insurance page shows how the pieces fit into one program.

How Assured Insurance Group helps

Assured Insurance Group helps contractors and trades in Flower Mound, Plano, Garland and across Dallas–Fort Worth with commercial insurance. Bring your license requirements and the insurance section of your contract, and we will walk through your current policy with you and go over your options. You can visit our Garland office, email info@assuredinsgroup.com, or request a quote. You can also call us at 214-222-5234.

Get a quote (214) 222-5234

Questions people ask next

Do subcontractors need their own insurance in Texas?

In practice, yes. Most general contractors will not let a subcontractor on site without proof of general liability, and many also ask for commercial auto and workers’ compensation. A subcontractor’s work is not automatically covered by the general contractor’s policy, and licensed trades have their own state minimums to meet.

Is workers’ compensation required for Texas contractors?

Not for most private work. Texas does not require most private employers to carry it. It is required on building or construction projects for governmental entities, where every person working on the site or providing services to the project must be covered. Many general contractors also require it by contract.

Does general liability insurance cover my tools?

No. General liability pays for injury or damage you cause to other people and their property. Your own tools and equipment, especially on a job site, in a trailer or in transit, are insured under inland marine coverage, often called a tools and equipment or contractor’s equipment policy.

Does general liability cover a subcontractor’s mistakes on my job?

It depends on the policy wording and on whether the subcontractor carried its own coverage. Some policies limit or exclude coverage for work done by uninsured subcontractors. That is why general contractors collect certificates and ask to be added as an additional insured on each subcontractor’s policy. Check your own policy for subcontractor conditions.

Is a contractor’s bond the same as insurance?

No. Insurance protects your business when a covered claim is made against it. A surety bond protects the project owner or a government body if you fail to meet an obligation, and the surety can seek repayment from you. Some cities and contracts ask for both, so read which one is being requested.

Can I use my personal truck for contracting work?

A personal auto policy may exclude or limit business use, especially for a truck that hauls tools, materials or a trailer for work every day. A commercial auto policy is built for that use and is what most contracts ask for. Tell your agent exactly how the truck is used.

Sources and further reading

General information for Texas readers, current as of October 2026. It is not legal, tax or insurance advice. Your coverage depends on the wording of your own policy.

More commercial insurance guides

Get a quote

Have this checked on your own policy.

Send the basics or your declarations page. We will go through what you have and what your options are.

Ali RizviInsurance Advisor, Assured Insurance Group
Call (214) 222-5234

Get a quote for commercial insurance

We reply by phone or email with your options.

Or call (214) 222-5234. See our privacy policy.

CallGet a quote