Texas · Commercial insurance
Tools and Equipment Insurance (Inland Marine): Covering What Leaves the Shop
Your property policy is built around an address. Your tools are not. Here is how inland marine coverage follows them to the job site, the trailer and the truck, and how to set it up so a claim pays what you expect.

In short
Inland marine insurance, often sold as a tools and equipment floater, covers business property that moves: tools, contractor equipment, materials in transit and customers’ property in your care. A standard commercial property policy is tied to the address on the policy, so it usually stops protecting that property once it leaves. A floater covers the listed property wherever it is used, up to the limit you choose.
- The Texas Department of Insurance describes inland marine as coverage for property kept on land, not on water, despite the name.
- A tools and equipment floater covers the insured property wherever it is used, not only at your shop.
- Commercial auto insurance covers the truck or trailer, not the tools riding inside it.
- Large items are usually listed one by one, while small tools are covered as a group under one blanket limit.
- Check whether a claim is paid at replacement cost or at actual cash value, which subtracts depreciation.
In this article
- Why is it called inland marine if my tools never touch water?
- What does a tools and equipment floater actually cover?
- Doesn't my property, BOP or commercial auto policy already cover my tools?
- How are tools listed and valued on the policy?
- What does a floater usually leave out?
- What about rented equipment, customers' property and materials in transit?
- How does a tools claim play out? A worked example
- How do you set up tools and equipment coverage the right way?
Service: Commercial Insurance in Flower Mound, Plano and Garland
If your tools, equipment or materials leave your shop, your commercial property policy probably stops covering them at the door. Inland marine insurance, usually sold as a tools and equipment floater, is the coverage that travels with them. It is one of the least expensive gaps to close and one of the most painful to discover after a theft.
Why is it called inland marine if my tools never touch water?
The name is a leftover from marine insurance, which covered cargo on ships. Insurers extended the same idea to property traveling over land and kept the word.
The Texas Department of Insurance puts it plainly: inland marine coverage covers property kept on land, not on water, despite its name. Its list of what the coverage can apply to includes contractor equipment, computers, property in transit, fine art, valuable papers and property held for others.
You will also hear the word “floater.” A floater is simply a policy that floats with the property instead of staying at one address. If you want the rest of the vocabulary in one place, the insurance glossary explains the terms used in this article.
What does a tools and equipment floater actually cover?
The Insurance Information Institute describes a tools and equipment floater as coverage for the insured property wherever it is used. Its examples run from hand tools and power drills to hoisting machines and power pumps.
In practice a floater is written for the property a business takes on the road:
- Hand and power tools, ladders, testing instruments and laptops used in the field
- Contractor equipment such as skid steers, trenchers, compressors, generators and scaffolding
- Trailers’ contents, job boxes and equipment stored at a job site
- Cameras, lighting, audio gear, medical or scientific equipment that goes to the client
- Materials on the way to a job, if you add an installation floater
The causes of loss depend on the policy wording. Many floaters are written to cover theft, fire, wind, hail, vandalism, collision or overturn of the vehicle carrying the property, and accidental damage. The Insurance Information Institute notes that collisions and cargo theft are the two most frequent causes of inland marine losses, which matches what any crew knows about leaving a loaded trailer on a job site.
Doesn't my property, BOP or commercial auto policy already cover my tools?
Sometimes a little, rarely enough. Each policy is built around something different, and tools fall between them.
A commercial property policy covers business property at the location named on the policy. A business owner's policy packages that same property coverage with liability. The Insurance Information Institute notes that tools and equipment that travel with employees to nearby job sites may be covered under a BOP or a commercial package policy, but the amount is usually small and the conditions are narrow, so check your declarations page before you count on it.
Commercial auto insurance covers the vehicle. It is designed to pay for the truck, van or trailer itself and for the damage you cause to others, not for the contents riding inside.
Where your tools are, and which policy is built to respond:
| Where the property is | Commercial property or BOP | Commercial auto | Tools and equipment floater |
|---|---|---|---|
| In your shop or office | Yes, up to the business property limit | No | Yes, if listed |
| In a truck or enclosed trailer | Usually no, or a small off-premises amount | Covers the vehicle, not the tools | Yes, subject to theft conditions |
| At a customer's job site overnight | Usually no | No | Yes, subject to policy conditions |
| At your home or a storage unit | Only if that location is on the policy | No | Yes, if the policy covers it there |
| Rented from an equipment yard | Usually no | No | Only if rented equipment is added |
What this means for you: if most of what you own spends its days in a truck or on someone else's property, the floater is the policy doing the real work. Do not assume the small off-premises amount in a property policy will replace a full trailer.
How are tools listed and valued on the policy?
There are two ways to put property on a floater, and most businesses use both.
Scheduled coverage lists each item separately with its own description, serial number and value. It is used for larger pieces: a mini excavator, a commercial camera body, a diagnostic machine.
Blanket coverage insures a whole group of smaller items under one limit without listing each one. It is used for the hand tools and cordless kits that nobody wants to itemize. Blanket coverage often comes with a maximum amount per item, so one expensive tool hidden in the blanket group can be underinsured.
The second question is how a loss is valued. The Texas Department of Insurance explains the two methods this way: replacement cost coverage pays to repair or replace your property at current costs, and actual cash value coverage pays replacement cost minus depreciation.
Two choices that decide how much a tool claim pays:
| Choice | Option A | Option B | What to check |
|---|---|---|---|
| How items are listed | Scheduled: each item named with its value | Blanket: one limit for a group of tools | The per-item maximum inside the blanket limit |
| How a loss is valued | Replacement cost: today's price for a new equivalent | Actual cash value: replacement cost minus depreciation | Which method applies to scheduled and to blanket items |
| Deductible | Lower: you pay less per claim | Higher: you pay more per claim | Whether one deductible applies per event or per item |
What this means for you: a five-year-old set of tools insured at actual cash value can pay far less than it costs to re-equip a crew. Ask which valuation applies before you choose a limit, and pick a deductible you could pay the same week a truck is emptied.
What does a floater usually leave out?
Every policy is different, so treat this as a list of questions to ask, not a list of facts about your policy. Most floaters do not cover:
- Wear and tear, rust, gradual deterioration and mechanical breakdown
- “Mysterious disappearance,” meaning a tool that is simply gone at inventory time with no sign of theft
- Theft from an unlocked vehicle, or theft with no visible signs of forced entry
- Dishonest acts by your own employees, which belong under a crime policy
- The vehicle or trailer itself, which belongs on the auto policy
- Injuries to people or damage to a customer's building, which belong under general liability insurance
North Texas hail is a real exposure for equipment parked outside, so ask whether wind and hail damage to equipment stored in the open is covered and at what deductible.
What about rented equipment, customers' property and materials in transit?
These are three separate exposures and they are easy to miss, because none of them is property you own.
Rented and leased equipment. A rental agreement usually makes you responsible for the machine while it is in your hands. A floater typically covers owned property unless rented or leased equipment is added, so ask for that coverage by name.
Customers' property in your care. A repair shop holding a customer's laptop, or a detailer holding a customer's equipment, is what insurers call a bailee. The Insurance Information Institute lists bailee's customer coverage as its own inland marine coverage, because general liability policies commonly exclude damage to property in your care, custody or control.
Materials on the way to a job. An installation floater covers materials from the moment they are loaded onto a truck until they are put to use or installed, in the words of the Insurance Information Institute. An HVAC contractor whose condensers are stolen from a new build has no tools claim. That is an installation floater claim.
If the contract for the job spells out who must insure materials and equipment, read it alongside the article on what Texas contractors are asked to carry.
How does a tools claim play out? A worked example
This is an illustration with round numbers, not a quote or a promise of payment.
A two-crew remodeling company keeps most of its tools in an enclosed trailer. The trailer is locked and parked overnight at a job site in Denton County. In the morning the lock is cut and the trailer is empty.
The company carries a floater with:
- $30,000 of blanket coverage for small tools, with a $2,500 maximum per item
- One scheduled item: a $12,000 tile saw and stand system
- Replacement cost valuation and a $1,000 deductible
What was taken: $22,000 of small tools at today's prices, a $4,000 laser level that was never scheduled, and the $12,000 scheduled saw.
- Small tools: $22,000, all under the per-item maximum, are within the blanket limit.
- Laser level: it was part of the blanket group, so the $2,500 per-item maximum applies. The company absorbs the other $1,500.
- Scheduled saw: $12,000, covered at its listed value.
- Total covered loss: $22,000 + $2,500 + $12,000 = $36,500.
- Less the $1,000 deductible: $35,500.
Now change one thing. If the same policy paid actual cash value and the adjuster applied 40% depreciation to the small tools, that $22,000 would be valued at $13,200. The company would be short almost $9,000 on the tools it needs to go back to work.
How do you set up tools and equipment coverage the right way?
Work through these steps once, then repeat the first two every year.
- Build an inventory. List every item worth scheduling with its make, model, serial number and purchase price. Photograph the rest in groups. Store the list somewhere other than the truck.
- Price it at today's cost. Add up what it would cost to replace everything new this week, not what you paid years ago.
- Split scheduled from blanket. Ask for the per-item maximum on blanket coverage and schedule everything above it.
- Confirm the valuation. Ask whether each part of the policy pays replacement cost or actual cash value.
- Read the theft conditions. Ask what the policy requires for theft from a vehicle, a trailer and a job site: locks, forced entry, attended or unattended.
- Add what you do not own. Rented equipment, employees' tools, customers' property and materials in transit each need to be added on purpose.
- Check your contracts. A lease, a loan on a machine or a job contract may name a limit or ask for proof. The article on certificates of insurance explains how that proof works in Texas.
- Report changes. Call before a newly bought machine goes to its first job.
To see how each line of coverage is priced, read what drives the cost of business insurance.
How Assured Insurance Group helps
Assured Insurance Group helps contractors, trades and service businesses in Flower Mound, Plano, Garland and across Dallas–Fort Worth with commercial insurance, including coverage for tools and equipment that leave the shop. We will walk through your current policy with you, look at where your property actually spends its time, and go over your options for scheduled and blanket coverage. If your work truck is also the family vehicle, we can look at your auto insurance at the same time. You can stop by the Flower Mound office, email info@assuredinsgroup.com, see everything we cover under business insurance, or request a quote and call 214-222-5234.
Questions people ask next
Does inland marine insurance cover tools stolen from my truck?
Often yes, but read the theft conditions first. Many floaters cover theft from a vehicle only when the vehicle was locked and there are visible signs of forced entry, and some limit or exclude theft from an unattended vehicle overnight. Ask how the policy treats an open truck bed, a job box and a locked trailer parked at a job site.
Is inland marine insurance required in Texas?
No Texas law requires a business to insure its own tools. The requirement usually comes from somewhere else: an equipment rental agreement, a lender that financed a machine, or a contract that makes you responsible for materials until they are installed. Read those documents for the limit and the wording they ask for.
Does a tools floater cover equipment I rent or borrow?
Only if the policy says so. Many floaters cover owned property unless you add coverage for rented, leased or borrowed equipment. Rental agreements commonly make you responsible for the full value of the machine, so match the limit to the most expensive item you rent and ask whether loss of rental income to the rental company is included.
Are my employees’ own tools covered by my policy?
Not automatically. A floater typically covers property the business owns. Some policies let you add employees’ tools for a limited amount per person. If your crew brings its own tools, ask for that option and tell your employees in writing what is and is not covered, so nobody finds out after a theft.
What is the difference between inland marine and builder’s risk?
A tools and equipment floater covers what you use to do the work. Builder’s risk covers the structure being built or renovated and the materials meant to become part of it. An installation floater sits between them: it covers materials from the time they are loaded until they are installed. All three belong to the inland marine family.
Does homeowners insurance cover business tools kept in my garage?
Only a little. The National Association of Insurance Commissioners notes that homeowners and renters policies typically cap business property at $2,500 at home and $250 away from home. A contractor who stores tools at home and carries them to job sites usually needs a business policy to cover them properly.
Sources and further reading
- Texas Department of Insurance: Commercial property insurance
- Insurance Information Institute: Understanding inland marine insurance
- Insurance Information Institute: Artisan contractors
- National Association of Insurance Commissioners: Small business insurance
- National Association of Insurance Commissioners: Glossary of insurance terms
General information for Texas readers, current as of September 2026. It is not legal, tax or insurance advice. Your coverage depends on the wording of your own policy.
More commercial insurance guides
- Your Commercial Lease Requires Insurance: How to Read the Requirements
- What Drives the Cost of Business Insurance?
- Additional Insured vs. Waiver of Subrogation: What Your Contract Is Asking For
- Surety Bonds vs. Insurance: What a Texas Business Is Really Buying
- Does a Texas LLC Still Need Business Insurance?
- Trucking Insurance in Texas: Liability Limits and Filings for Motor Carriers



